Installing Vyper¶
Don’t panic if the installation fails. Vyper is still under development and undergoes constant changes. Installation will be much more simplified and optimized after a stable version release.
Take a deep breath, follow the instructions, and please create an issue if you encounter any errors.
Note
The easiest way to try out the language, experiment with examples, and compile code to bytecode
or LLL
is to use the online compiler at https://vyper.online/.
Prerequisites¶
Installing Python 3.6¶
Vyper can only be built using Python 3.6 and higher. If you are already running Python 3.6, skip to the next section, else follow the instructions here to make sure you have the correct Python version installed, and are using that version.
Ubuntu¶
16.04 and older¶
Start by making sure your packages are up-to-date:
sudo apt-get update
sudo apt-get -y upgrade
Install Python 3.6 and some necessary packages:
sudo apt-get install build-essential libssl-dev libffi-dev
wget https://www.python.org/ftp/python/3.6.2/Python-3.6.2.tgz
tar xfz Python-3.6.2.tgz
cd Python-3.6.2/
./configure --prefix /usr/local/lib/python3.6
sudo make
sudo make install
16.10 and newer¶
From Ubuntu 16.10 onwards, the Python 3.6 version is in the universe repository.
Run the following commands to install:
sudo apt-get update
sudo apt-get install python3.6
MacOS¶
Make sure you have Homebrew installed. If you don’t have the brew command available on the terminal, follow these instructions to get Homebrew on your system.
To install Python 3.6, follow the instructions here: Installing Python 3 on Mac OS X
Also, ensure the following libraries are installed using brew:
brew install gmp leveldb
Creating a virtual environment¶
It is strongly recommended to install Vyper in a virtual Python environment, so that new packages installed and dependencies built are strictly contained in your Vyper project and will not alter or affect your other development environment set-up.
To create a new virtual environment for Vyper run the following commands:
virtualenv -p python3.6 --no-site-packages ~/vyper-venv
source ~/vyper-venv/bin/activate
To find out more about virtual environments, check out: virtualenv guide.
Installation¶
Again, it is strongly recommended to install Vyper in a virtual Python environment. This guide assumes you are in a virtual environment containing Python 3.6.
Get the latest version of Vyper by cloning the Github repository, and run the install and test commands:
git clone https://github.com/ethereum/vyper.git
cd vyper
make
make test
Additionally, you may try to compile an example contract by running:
vyper examples/crowdfund.v.py
If everything works correctly, you are now able to compile your own smart contracts written in Vyper. However, please keep in mind that Vyper is still experimental and not ready for production!
Note
If you get the error fatal error: openssl/aes.h: No such file or directory in the output of make, then run sudo apt-get install libssl-dev1, then run make again.
For MacOS users:
Apple has deprecated use of OpenSSL in favor of its own TLS and crypto libraries. This means that you will need to export some OpenSSL settings yourself, before you can install Vyper.
Use the following commands:
export CFLAGS="-I$(brew --prefix openssl)/include"
export LDFLAGS="-L$(brew --prefix openssl)/lib"
pip install scrypt
Now you can run the install and test commands again:
make
make test
If you get the error ld: library not found for -lyaml in the output of make, make sure libyaml is installed using brew info libyaml. If it is installed, add its location to the compile flags as well:
export CFLAGS="-I$(brew --prefix openssl)/include -I$(brew --prefix libyaml)/include"
export LDFLAGS="-L$(brew --prefix openssl)/lib -L$(brew --prefix libyaml)/lib"
You can then run make and make test again.
Docker¶
A Dockerfile is provided in the master branch of the repository. In order to build a Docker Image please run:
docker build https://github.com/ethereum/vyper.git -t vyper:1
docker run -it vyper:1 /bin/bash
To ensure that everything works correctly after the installtion, please run the test commands and try compiling a contract:
make test
vyper examples/crowdfund.v.py
Snap¶
Vyper is published in the snap store. In any of the supported Linux distros, install it with:
sudo snap install vyper --edge
(Note that this is an experimental and unstable release, at the moment)